PLAMO: Re-WiredWolf - Plastic Modelling, Share & Learn

How to do CF Car Hood

1. After you have done the main body colour and gloss coated the surface. Use masking tape to lay on the hood.


2. Use a new blade and cut to shape.


3. Now you have your template of the hood. Cut to shape on the CF decal.
(Note, good to have about 1-2mm allowance at the side for any final adjustments)


4. Using soft paint brush to apply the decal softener slowly and carefully. As the decal softens.. use blade to cut the holes. Take note to slice the decals to the corners of the holes so that the decal can fold inwards.
I took 1.5 hours to slowly conform the CF decal to the whole hood.
(includes waiting time for the decal to soften)

Good one Max!!! Thanks for the info!!!

Wow! Really nicely done CF decal for the hood.

Tomolo will do up the rest of the paint work and gloss the CF also

Very very very pretty, old chap!

nice tutorial~~

great tip max. nice CF decal job too...

Thanks alot bro.
Thanks for the great tutorial

After decals, LOTs of Gunze Gloss.. nice and thick



I wet sanded with Grit 2000 sandpaper and then the blue sanding film from M Workshop.. think it was 7 Micron.


Elbow grease polishing
Bling Bling





Just washed the body and scrub off the compound residue with old toothbrush..

Tomolo can mask and AB the window trim liao

Nice!!

But I got noob question, is carbon fiber glossy in real life?